How to Build a Pole Shed

How to Build a Pole Shed

How to Build a Pole Shed – Introduction

A pole shed is a basic construction, one of the simplest buildings to make, design is simple, straightforward and functional. A pole shed is what should come to your mind if you are looking out to utilize your outdoor place for the storage purpose, they can be very easily built in open spaces. If you need to build a large shed but you have money limitation , consider building a pole shed. Materials and methods for building this type of outbuilding can save you money. The construction requires only basic woodworking skills, lumber, as well as basic tools such as hammers and nails. The wood used to make a pole shed does not need to be very expensive, and the shed can easily be constructed in any required size. Following a few simple steps, even a novice home improvement fan can make a pole shed.

Let’s learn how to build a pole shed by following the guidelines below.

Step 1: Planning How to Build a Pole Shed

How to Build a Pole Shed

How to Build a Pole Shed


Before you start anything else you need to decide how big you want your shed. Do you need a monster pole barn or just a small pole shed? Draw out a clear sketch of how you intend the shed to look, this will help you to visualize the shed. The most important thing you need is to have a perfect pole shed plan. A well drawn plan and its perfect execution is always important for perfect pole shed. Choose a location for your pole shed that is flat and well-drained. Make sure the future building site is several feet larger than your shed will be. Selecting ideal location for the pole shed is as much important as planning for it. Once the location has been selected. Important thing is to check with local authorities if it is legal to build an outhouse and if not, then taking the permission becomes an important task. Not all, but in some areas the permission of the local authority is mandatory.

Step 2 – Building a Pole Shed

Dig holes in the ground, approximately just below the frost level using a hand held post hole digger. It is very important for the holes to be larger than the actual size of the posts. They must be at least 18 inches deep. If you live in an area where the soil tends to be wet, the holes will need to be deeper and wider to keep the poles in place. Be certain all the corners of the shed are exactly 90 degrees. A layer of gravel (make a 1 to 1 1 inch of gravel base) should then be put into the bottom of the hole, to ensure that the hole has suitable drainage. Place the post in the hole, and then fill the space around it with concrete Filling in additional concrete is required to keep the post away from exposure to the moisture and freezing if you live in extremely cold weather. Provide support to the poles, until the concrete dries off.

Step 3 – Making the Roof

Once the posts are in position, you can begin to build the roof sections. Place the stringers on top of the poles and secure well, checking them with a carpenter’s level. Once the stringers are set, install the roof trusses. You may need help with the first one, as it is the most difficult to place. After the first truss is secured, the remaining trusses can be braced against the first. Mount the purlins across the trusses. Purlins help to support the load from the roof. Once the purlins are in place, add the roofing, overlapping each piece of material and securing each section through the overlap with roofing nails. Make sure the roofing material extends beyond the frame at least 3 inches on all sides. Cover the peak of the roof with a ridge cap.

And you’re finished.

Tanks you for reading How to Build a Pole Shed and follow our next post on Shed Building Blog

For more information How to Build a Pole Shed visit:

Building a Shed
Comments are closed.